Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Pfalz Flugzeugwerke shopping experience:
1. Compare - without doubt the biggest advantage that the Pfalz Flugzeugwerke offers shoppers today is the ability to compare thousands of Pfalz Flugzeugwerke at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.
2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about
3. Testimonials - don't know anybody that has bought a Pfalz Flugzeugwerke? Wrong! If the Pfalz Flugzeugwerke is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.
4. Questions - Got a question about Pfalz Flugzeugwerke then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....
5. Reputation - Never heard of the company selling Pfalz Flugzeugwerke? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Pfalz Flugzeugwerke and build up a picture of their reputation for sales, returns, customer service, delivery etc.
6. Returns - still worried that even after all of the above your Pfalz Flugzeugwerke wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.
7. Feedback - happy with your Pfalz Flugzeugwerke then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.
8. Security - check for the yellow padlock on the Pfalz Flugzeugwerke site before you buy, and the s after http:/ /i.e. https:// = a secure site
9. Contact - got a question about Pfalz Flugzeugwerke, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.
10. Payment - ready to pay for your Pfalz Flugzeugwerke, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.
Pfalz Flugzeugwerke was a World War I Germany aircraft manufacturer, located at the Speyer airfield in
Bavaria. They are best known for their series of fighters, notably the
Pfalz D.III and Pfalz D.XII. The company went bankrupt after the Armistice, when the French occupation forces confiscated all of the equipment, but the factory was re-used by various other companies until re-forming in 1997. Today they are a parts manufacturer referred to as
PFW.
Early history
Pfalz was the brainchild of Alfred Eversbusch, son of a foundry owner in Neustadt an der Weinstraße. It appears that he had built his own aircraft between 1912 and 1913, although the exact origin of the design is unclear. On June 3,
1913, the Pfalz company was registered, consisting of Alfred, his brother Ernst, and his brother-in-law Willy Sabersky-Müssigbrodt, as well as several investors: Richard and Eugen Kahn, and August Khan (unrelated).
They initially proposed to build designs from Albatros Flugzeugwerke, but their attempts at a deal amounted to nothing. Their next deal was with Gustav Otto Flugzeugwerke, building examples of his Pusher configuration-propeller biplane design. The original example was sent to Africa on a tour, and ended up being pressed into service as a scout.
The company had always planned to set up shop at the new airfield in Speyer, but they initially had problems securing land for a factory. The Gustav designs were actually built in the Speyer Festival Hall, which was unused at the time. It was not until
February 6, 1914, that the city agreed to sell Pfalz 7,000 m² to build their factory. Construction was completed in July, only one month before the start of
World War I.
World War I
By this point, the company had arranged a license to produce Morane-Saulnier monoplanes, which were quickly put into German service. When these became uncompetitive on the Western Front, Pfalz shifted production to the
Luftfahrzeug Gesellschaft Roland D.I and Roland D.II. The D.II was produced into late 1916, by which point it too was no longer competitive.
Instead of licensing another design, Pfalz instead used the Roland's
plywood semi-monocoque fuselage design and combined it with the new 160 hp
Mercedes D.III engine to create the Pfalz D.III. The D.III entered service in August 1917, but was not considered a match for contemporary designs like the
Albatros D.V, and instead found a niche role in attacking
observation balloons where its high diving speed was a major advantage. About 600 D.IIIs and slightly modified D.IIIas were built between its introduction in August and its replacement a year later. Many were still in service at that time, about 450.
Adaptations of the D.III with the new
Siemens-Halske Sh.III Rotary engine resulted in the Pfalz D.VIII, which featured an incredible rate of climb (which it shared with the other Sh. III powered fighter, the
Siemens-Schuckert D.IV). The Sh. III proved to be rather unreliable due to the
ersatz engine oil available, and only a small number of D.VIIIs were built. These did see front-line use by Jasta 29 (Jasta Boelcke) at least, although it is unclear how many were built in total.
The D.VIII was also adapted to triplane configuration as the
Pfalz Dr.I for entry in the First Fighter Competition at
Adlershof in January 1918. Like the D.VIII, it was powered by the Sh. III, and therefore completely outpowered its Motorenfabrik Oberursel powered contemporaries. Nevertheless, the Fokker Dr.I was the winner of the contest, which is not surprising considering that it was the only aircraft entered that was designed from the outset as a triplane, as opposed to being a quickly-adapted biplane. About a dozen Dr. Is were built and used operationally for some time.
The final major production model was the
Pfalz D.XII, a development of the D.III that abandoned the sesquiplane configuration in favor of two-bay wings similar to those of the French SPAD. It entered the Second Fighter Competition in June 1918 against the famous Fokker E.V monoplane and other designs. Although generally similar to the Fokker D.VII in looks and performance, the D.XII was widely considered to be inferior in handling characteristics and difficult to land. Nevertheless the D.XII was ordered into production, and about 800 were produced before the Armistice. Many of these survived the war and were taken as booty by the Allies. A few aircraft were eventually featured in various movies, notably Hell's Angels (film) and
The Dawn Patrol.
A derivative of the D.XII, the D.XIV, was not ordered into the production. Pfalz's final scout, the D.XV, participated in the Third Fighter Competition. The
Idflieg ordered the D.XV into production just before the Armistice, but it did not see operational service.
Interbellum
At the end of the war, the Pfalz factory fell into the French-occupied area, and was stripped of anything useful. On June 4,
1919, the company was re-established as
A.G. Pfalz, which listed its main businesses as "shipbuilding, production, and the buying and selling of industrial goods." This company eventually went bankrupt during the
Great Depression in 1932.
World War II
On
October 1,
1937 the factories once again turned to aircraft work, this time under the name
Saarpfalz Flugwerke, a maintenance company. The Speyer airfield was no longer operational, so aircraft repaired there had to be transported to Mannheim-Neuostheim for flight, but the city decided to rebuild the airport over the next year and it re-opened in 1938.
The new company grew quickly, starting with over 200 employees by the end of 1937, growing to 500 by the start of the war, and to 1,500 by the time the war ended. They maintained many designs during this time, including the
Focke-Wulf Fw 58, Heinkel He 45,
Heinkel He 46,
Heinkel He 51 and
Heinkel He 111,
Junkers Ju 52, and
Junkers Ju 88.
Work at the plants ended in March 1945 due to the approach of American and French troops.
Ernst Heinkel, VFW and MBB
Ernst Heinkel introduced his famous bubblecar, the Heinkel Kabine, in 1955, receiving a roadworthiness certificate in February 1956. He soon purchased the Speyer plants for additional production capability, adding to the major
assembly line in
Karlsruhe. Given the location at the airfield, it appears he may have been planning to start aircraft production at Speyer as well.
Over the next five years, 3,800 Heinkelkabine's were produced at the Speyer plants, reaching 50 a day. However, Heinkel's death in 1958 ended any plans for expansion into aircraft, and in 1961 the two assembly lines were sold off to Ireland and Argentina.
In 1964 the remains of Heinkel,
Focke Wulf and Weser Flugzeugbau merged to form
Vereinigte Flugtechnische Werke (and for a time, VFW-Fokker). The Speyer plants were then involved in production of the Transall C-160, building 169 of them. They also produced on parts for the UH-1 Iroquois and
CH-53 Sea Stallion, produced under license by VFW. Some work was also carried out for other aviation companies, notably
Messerschmitt-Bölkow-Blohm (MBB),
Dornier, and the engine manufacturer MTU.
In 1983 MBB bought the Speyer factories and turned them into a primary helicopter repair center. MBB ran into financial difficulties, and merged with Deutsche Aerospace in 1989.
Pfalz Flugzeugwerke reforms
On
January 1, 1997 the Speyer plant was handed over to the remaining 523 employees, and once again renamed
Pfalz Flugzeugwerke. They continue their work in helicopter maintenance to this day.
References
Pfalz Flugzeugwerke was a
World War I Germany aircraft manufacturer, located at the Speyer airfield in Bavaria. They are best known for their series of fighters, notably the
Pfalz D.III and
Pfalz D.XII. The company went bankrupt after the Armistice, when the French occupation forces confiscated all of the equipment, but the factory was re-used by various other companies until re-forming in 1997. Today they are a parts manufacturer referred to as
PFW.
Early history
Pfalz was the brainchild of Alfred Eversbusch, son of a foundry owner in
Neustadt an der Weinstraße. It appears that he had built his own aircraft between 1912 and 1913, although the exact origin of the design is unclear. On
June 3, 1913, the Pfalz company was registered, consisting of Alfred, his brother Ernst, and his brother-in-law Willy Sabersky-Müssigbrodt, as well as several investors: Richard and Eugen Kahn, and August Khan (unrelated).
They initially proposed to build designs from Albatros Flugzeugwerke, but their attempts at a deal amounted to nothing. Their next deal was with Gustav Otto Flugzeugwerke, building examples of his
Pusher configuration-propeller biplane design. The original example was sent to Africa on a tour, and ended up being pressed into service as a scout.
The company had always planned to set up shop at the new airfield in Speyer, but they initially had problems securing land for a factory. The Gustav designs were actually built in the Speyer Festival Hall, which was unused at the time. It was not until February 6, 1914, that the city agreed to sell Pfalz 7,000 m² to build their factory. Construction was completed in July, only one month before the start of World War I.
World War I
By this point, the company had arranged a license to produce
Morane-Saulnier monoplanes, which were quickly put into German service. When these became uncompetitive on the Western Front, Pfalz shifted production to the Luftfahrzeug Gesellschaft
Roland D.I and Roland D.II. The D.II was produced into late 1916, by which point it too was no longer competitive.
Instead of licensing another design, Pfalz instead used the Roland's
plywood semi-monocoque fuselage design and combined it with the new 160 hp
Mercedes D.III engine to create the
Pfalz D.III. The D.III entered service in August 1917, but was not considered a match for contemporary designs like the Albatros D.V, and instead found a niche role in attacking
observation balloons where its high diving speed was a major advantage. About 600 D.IIIs and slightly modified D.IIIas were built between its introduction in August and its replacement a year later. Many were still in service at that time, about 450.
Adaptations of the D.III with the new
Siemens-Halske Sh.III Rotary engine resulted in the
Pfalz D.VIII, which featured an incredible rate of climb (which it shared with the other Sh. III powered fighter, the
Siemens-Schuckert D.IV). The Sh. III proved to be rather unreliable due to the
ersatz engine oil available, and only a small number of D.VIIIs were built. These did see front-line use by Jasta 29 (Jasta Boelcke) at least, although it is unclear how many were built in total.
The D.VIII was also adapted to triplane configuration as the
Pfalz Dr.I for entry in the First Fighter Competition at Adlershof in January 1918. Like the D.VIII, it was powered by the Sh. III, and therefore completely outpowered its Motorenfabrik Oberursel powered contemporaries. Nevertheless, the
Fokker Dr.I was the winner of the contest, which is not surprising considering that it was the only aircraft entered that was designed from the outset as a triplane, as opposed to being a quickly-adapted biplane. About a dozen Dr. Is were built and used operationally for some time.
The final major production model was the
Pfalz D.XII, a development of the D.III that abandoned the sesquiplane configuration in favor of two-bay wings similar to those of the French SPAD. It entered the Second Fighter Competition in June 1918 against the famous
Fokker E.V monoplane and other designs. Although generally similar to the
Fokker D.VII in looks and performance, the D.XII was widely considered to be inferior in handling characteristics and difficult to land. Nevertheless the D.XII was ordered into production, and about 800 were produced before the Armistice. Many of these survived the war and were taken as booty by the Allies. A few aircraft were eventually featured in various movies, notably Hell's Angels (film) and
The Dawn Patrol.
A derivative of the D.XII, the D.XIV, was not ordered into the production. Pfalz's final scout, the D.XV, participated in the Third Fighter Competition. The
Idflieg ordered the D.XV into production just before the Armistice, but it did not see operational service.
Interbellum
At the end of the war, the Pfalz factory fell into the French-occupied area, and was stripped of anything useful. On
June 4,
1919, the company was re-established as
A.G. Pfalz, which listed its main businesses as "shipbuilding, production, and the buying and selling of industrial goods." This company eventually went bankrupt during the Great Depression in 1932.
World War II
On
October 1, 1937 the factories once again turned to aircraft work, this time under the name
Saarpfalz Flugwerke, a maintenance company. The Speyer airfield was no longer operational, so aircraft repaired there had to be transported to Mannheim-Neuostheim for flight, but the city decided to rebuild the airport over the next year and it re-opened in 1938.
The new company grew quickly, starting with over 200 employees by the end of 1937, growing to 500 by the start of the war, and to 1,500 by the time the war ended. They maintained many designs during this time, including the
Focke-Wulf Fw 58,
Heinkel He 45,
Heinkel He 46, Heinkel He 51 and
Heinkel He 111,
Junkers Ju 52, and
Junkers Ju 88.
Work at the plants ended in March 1945 due to the approach of American and French troops.
Ernst Heinkel, VFW and MBB
Ernst Heinkel introduced his famous bubblecar, the Heinkel Kabine, in 1955, receiving a roadworthiness certificate in February 1956. He soon purchased the Speyer plants for additional production capability, adding to the major assembly line in
Karlsruhe. Given the location at the airfield, it appears he may have been planning to start aircraft production at Speyer as well.
Over the next five years, 3,800 Heinkelkabine's were produced at the Speyer plants, reaching 50 a day. However, Heinkel's death in 1958 ended any plans for expansion into aircraft, and in 1961 the two assembly lines were sold off to Ireland and Argentina.
In 1964 the remains of Heinkel, Focke Wulf and
Weser Flugzeugbau merged to form Vereinigte Flugtechnische Werke (and for a time, VFW-Fokker). The Speyer plants were then involved in production of the
Transall C-160, building 169 of them. They also produced on parts for the UH-1 Iroquois and
CH-53 Sea Stallion, produced under license by VFW. Some work was also carried out for other aviation companies, notably
Messerschmitt-Bölkow-Blohm (MBB),
Dornier, and the engine manufacturer
MTU.
In 1983 MBB bought the Speyer factories and turned them into a primary helicopter repair center. MBB ran into financial difficulties, and merged with Deutsche Aerospace in 1989.
Pfalz Flugzeugwerke reforms
On January 1,
1997 the Speyer plant was handed over to the remaining 523 employees, and once again renamed
Pfalz Flugzeugwerke. They continue their work in helicopter maintenance to this day.
References
